leeross Posted October 9, 2010 Report Share Posted October 9, 2010 fantic 125/200. back kick minarelli engine If the bike is in gear and push the bike foward (engine not running) when i pull the clutch in it doesnt free wheel.. any idea what the problem is? cheers Quote Link to comment Share on other sites More sharing options...
bilc0 Posted October 9, 2010 Report Share Posted October 9, 2010 Sounds like you have a frozen crotch i mean clutch,if bike been standing long time the clutch plates stick together,whack the case off and have alook at plates. Quote Link to comment Share on other sites More sharing options...
leeross Posted October 9, 2010 Author Report Share Posted October 9, 2010 took clutch cover off. clutch plates seem to be moving freely when pulling clutch the lever. Quote Link to comment Share on other sites More sharing options...
ask greeves Posted October 9, 2010 Report Share Posted October 9, 2010 (edited) you really need to disassemble the clutch, as the drive plates and driven plates, could move as your saying, but stuck together. I personally would have driven the bike (in a high gear ) with the clutch lever pulled in with lots of throttle and your foot on the footbrake (put some torque through the clutch). This is always my 1st thing to try, to free a clutch, before taking it to bits. Edited October 9, 2010 by ask greeves Quote Link to comment Share on other sites More sharing options...
leeross Posted October 10, 2010 Author Report Share Posted October 10, 2010 cheers for the info - took the clutch off, the clutch plates were binded together because its been idle. seperated then all clutch now working fine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.