turps Posted October 30, 2010 Report Share Posted October 30, 2010 Can anyone help me? I cannot get a spark on my son's TY80, there is power getting to the coil because I can get a spark from the low tension wire onto the cylinder head but there is no spark at the plug despite fitting a brand new coil and checking that it is earthed properly. I don't have any means to check if there's enough power going into it so is it possible that a change of condenser and points will fix the problem? thanks in advance. Quote Link to comment Share on other sites More sharing options...
john b Posted October 30, 2010 Report Share Posted October 30, 2010 Hi I had an intermittant spark on a one I've just rebuilt and I fitted an ignition tune up kit from TY Trials (points, condensor etc etc) from TY Trials which fied the problem straight away. John, the guy at TY Trials is very very knowledgeable on TY's as well so would offer advice cheers John Quote Link to comment Share on other sites More sharing options...
john b Posted October 30, 2010 Report Share Posted October 30, 2010 I've just looked at your post again - I'm sure I rode round some of this years Nostalgia with you ? I was on a TL125. cheers John Quote Link to comment Share on other sites More sharing options...
turps Posted October 31, 2010 Author Report Share Posted October 31, 2010 Yes I believe you did, I had a good time and look forward to next years, thanks for the help. James Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.