caddabs Posted November 14, 2010 Report Share Posted November 14, 2010 Hi all - struggling to find a replacement rear disc guard for my 2000. Does anybody know where to get one or whether any other make or model will fit? usually get bits from Splatshop but they are 2007 onwards. will they fit a 2000? many thanks Caddabs Quote Link to comment Share on other sites More sharing options...
coriolis Posted November 14, 2010 Report Share Posted November 14, 2010 Hi. They are a universal fit Quote Link to comment Share on other sites More sharing options...
coriolis Posted November 14, 2010 Report Share Posted November 14, 2010 (edited) Whoops ! sorry i was thinking of rear sprocket guards! As i remember, my 2000 sherco didnt have a disk guard The newer ones probably wont fit as the calliper on them sits behind the swingarm, where as yours, i believe, sits on top. Edited November 14, 2010 by coriolis Quote Link to comment Share on other sites More sharing options...
caddabs Posted November 14, 2010 Author Report Share Posted November 14, 2010 Thanks Corriolis - There appears to be a hanger with bolt holes on the swinging arm on the disc side - my stand is whacking the disc and scoring it and i think a disc guard would act as a rest for the stand. Not sure if the new(er) Sherco ones will fit or whether anything off another bike could be adapted? Cheers caddabs Quote Link to comment Share on other sites More sharing options...
coriolis Posted November 14, 2010 Report Share Posted November 14, 2010 Thanks Corriolis - There appears to be a hanger with bolt holes on the swinging arm on the disc side - my stand is whacking the disc and scoring it and i think a disc guard would act as a rest for the stand. Not sure if the new(er) Sherco ones will fit or whether anything off another bike could be adapted? Cheers caddabs Ah...thats right, its all flooding back to me! Yeah they had a hanger, similar to the disk side one, yet they never made or supplied a guard ! I think i made one out of ally once, looked terrible, but did the job ! As most bikes have the small calliper behind the swingarm now, you will probably have to look at older bikes to see if they have one that will fit. Quote Link to comment Share on other sites More sharing options...
tony27 Posted November 15, 2010 Report Share Posted November 15, 2010 Older Gas Gas ones fit as they ran the caliper above the swingarm as well. Think you'd need to look at pre 2000 model stuff Quote Link to comment Share on other sites More sharing options...
caddabs Posted November 15, 2010 Author Report Share Posted November 15, 2010 Thanks Tony - send my best to the Coromandel - will get back there one day! Quote Link to comment Share on other sites More sharing options...
copemech Posted November 18, 2010 Report Share Posted November 18, 2010 Thanks Tony - send my best to the Coromandel - will get back there one day! Think I used to run one off a Mont of that era. Had to shim it with a washer or two I think. Quote Link to comment Share on other sites More sharing options...
caddabs Posted November 22, 2010 Author Report Share Posted November 22, 2010 Just ordered an old Gas Gas one which i am told will fit. These guys very helpful if anyone else needs one Feet up Trialsport Quote Link to comment Share on other sites More sharing options...
charliechitlins Posted November 22, 2010 Report Share Posted November 22, 2010 Just ordered an old Gas Gas one which i am told will fit. These guys very helpful if anyone else needs one Feet up Trialsport I bought a plastic cutting board...very strong stuff. Cut my guards out with a coping saw. It was even blue! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.