kayloe Posted November 16, 2010 Report Share Posted November 16, 2010 Hi all, removed the ducati coil and regulator off my 300 to check wiring to see if anything could aid / resolve the hot starting issues. I have come to refit the coil/ht but cant make my mind up which way round it went when i put the tank on it does not sit flat so something is not right. does it sit with the ht outlet pointing directly up or on its side? many thanks Kay Quote Link to comment Share on other sites More sharing options...
peterb Posted November 18, 2010 Report Share Posted November 18, 2010 Hello Kay, The Ht coil sits with the HT lead on it's side. The problem with the hot starting with Ducati ign on the GG is the ign sensor sir gap has to be set really close, 8 thou is fine. (Distance between the sensor and the flywheel. Ta ta, PeterB. Quote Link to comment Share on other sites More sharing options...
smalley250 Posted November 18, 2010 Report Share Posted November 18, 2010 Ring GasGas Uk and option 4 this will give you Tech advise from the horses mouth so to speak. I had issues with my bike and now it runs 100% after following Mr Hipwell`s advice. Quote Link to comment Share on other sites More sharing options...
kayloe Posted November 18, 2010 Author Report Share Posted November 18, 2010 Ring GasGas Uk and option 4 this will give you Tech advise from the horses mouth so to speak. I had issues with my bike and now it runs 100% after following Mr Hipwell`s advice. thanks again Quote Link to comment Share on other sites More sharing options...
kayloe Posted November 18, 2010 Author Report Share Posted November 18, 2010 Hello Kay, The Ht coil sits with the HT lead on it's side. The problem with the hot starting with Ducati ign on the GG is the ign sensor sir gap has to be set really close, 8 thou is fine. (Distance between the sensor and the flywheel. Ta ta, PeterB. many thanks Quote Link to comment Share on other sites More sharing options...
kayloe Posted November 22, 2010 Author Report Share Posted November 22, 2010 many thanks Hi, Anyone got a under tank picture? i cant get it all to sit right then the tank is proud and now its starting to pull on the connectors. Its the ducati type please. many thanks kay Quote Link to comment Share on other sites More sharing options...
kayloe Posted November 25, 2010 Author Report Share Posted November 25, 2010 Hi, Anyone got a under tank picture? i cant get it all to sit right then the tank is proud and now its starting to pull on the connectors. Its the ducati type please. many thanks kay Anyone help with this, struggling to get the coil and wiring back in place, tank sits proud all the time.If it sits on its side does the h.t wire exit at the bottom and wiring harness exit at the top? many thanks Quote Link to comment Share on other sites More sharing options...
faktree Posted November 26, 2010 Report Share Posted November 26, 2010 Ring GasGas Uk and option 4 this will give you Tech advise from the horses mouth so to speak. I had issues with my bike and now it runs 100% after following Mr Hipwell`s advice. . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.