mtaylor Posted January 28, 2011 Report Share Posted January 28, 2011 Hi...My TY250R mono starts 2/3 kick and ticks over fine, once I kill the engine walk a section and go back to kick it over it wont start, I've tried leaving the petrol on/off but no joy, anybody else experienced similar ? Quote Link to comment Share on other sites More sharing options...
pumpkin trials Posted January 28, 2011 Report Share Posted January 28, 2011 I had a 350 version that had a similar problem and it turned out after a lot of expensive trys to be the 3 pin connector in the wiring under the tank. When the bike got warm this expanded and broke the connection between both parts of the loom until it cooled and contracted allowing the electrics to work best thing to do was to cut both and wire direct, worked perfect after that Quote Link to comment Share on other sites More sharing options...
mtaylor Posted January 28, 2011 Author Report Share Posted January 28, 2011 I had a 350 version that had a similar problem and it turned out after a lot of expensive trys to be the 3 pin connector in the wiring under the tank. When the bike got warm this expanded and broke the connection between both parts of the loom until it cooled and contracted allowing the electrics to work best thing to do was to cut both and wire direct, worked perfect after that cheers for that I will try the mod over the weekend. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.