andymower Posted February 26, 2011 Report Share Posted February 26, 2011 hi everyone had a wet practice trial today got home and cleaned my bike down and started it up and then water started blowing out through the gasket when it was running stopped the bike and toke the flywheel cover off and there was dirty water in there is this a major problem or just a gasket? if just a gasket where can i get one from? cheers for any advice andy Quote Link to comment Share on other sites More sharing options...
ormplus Posted February 27, 2011 Report Share Posted February 27, 2011 just clean it and let it dry out. gas gas recomend a 6mm hole in bottom of cover to let water out.put cover back on with a little mastik or a gasket from gas gas uk. Quote Link to comment Share on other sites More sharing options...
richt Posted February 27, 2011 Report Share Posted February 27, 2011 A small amount of Mastic could be better as the plastic flywheel covers distort when tightened up. The gasket on mine is only sealing around the bolts. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.