skeptic Posted March 3, 2011 Report Share Posted March 3, 2011 The triple clamp (upper clamp) on my 1974 TL125 is broken. Where the bolt tightens, it fractured and separated on the side opposite the bolt. I don't think welding would work. What other makes/models would be compatible with the stock upper clamp/bridge? 1 Quote Link to comment Share on other sites More sharing options...
skeptic Posted March 8, 2011 Author Report Share Posted March 8, 2011 The triple clamp (upper clamp) on my 1974 TL125 is broken. Where the bolt tightens, it fractured and separated on the side opposite the bolt. I don't think welding would work. What other makes/models would be compatible with the stock upper clamp/bridge? Anyone? 1 Quote Link to comment Share on other sites More sharing options...
tltel Posted March 10, 2011 Report Share Posted March 10, 2011 Anyone? Hi I think SL ones are the same and probably XL of the same period, most of the small hondas had the same 31mm forks but the top clamps are wider on some models. TLTEL Quote Link to comment Share on other sites More sharing options...
b40rt Posted March 10, 2011 Report Share Posted March 10, 2011 Might also be worth checking the Chinese copy's, must be lots of scrap one's of those kicking about. Quote Link to comment Share on other sites More sharing options...
tlrider Posted March 11, 2011 Report Share Posted March 11, 2011 TLTEL is correct. SL100 will fit but XL are wider, less offset on the XL. SL100 thru SL100K3 has product code 110. P/N is 53230-110-305. They show up on EvilBay from time to time. Scooter Quote Link to comment Share on other sites More sharing options...
skeptic Posted March 12, 2011 Author Report Share Posted March 12, 2011 TLTEL is correct. SL100 will fit but XL are wider, less offset on the XL. SL100 thru SL100K3 has product code 110. P/N is 53230-110-305. They show up on EvilBay from time to time. Scooter Thank you. Quote Link to comment Share on other sites More sharing options...
sherpat250 Posted June 7, 2011 Report Share Posted June 7, 2011 The triple clamp (upper clamp) on my 1974 TL125 is broken. Where the bolt tightens, it fractured and separated on the side opposite the bolt. I don't think welding would work. What other makes/models would be compatible with the stock upper clamp/bridge? I had the same thing happen on my '74 TL-125, and it was able to be welded. It took a bit of finish grinding to get it back to original dimensions, but the weld has been holding for about a year now. Take it to someone experienced in aluminum welding and it should not be a problem. --Cheers. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.