mattsherco290 Posted March 16, 2011 Report Share Posted March 16, 2011 hi everyone i have sherco 290 2000 and process of rebuild and think may have gearbox in wrong . the cases are back together so i want help first before i take it apart . it doesnt go into gear properly its like its stuck in between 2 gears that round spindle selector with the pins on the righthandside only turns a bit and gets stopped or stuck its like stuck on top off a tooth can anyone help please cheeers. 1 Quote Link to comment Share on other sites More sharing options...
neo Posted March 16, 2011 Report Share Posted March 16, 2011 Did you take it apart for a gearbox problem? Best of balance. Neo Quote Link to comment Share on other sites More sharing options...
copemech Posted March 16, 2011 Report Share Posted March 16, 2011 One may have to rotate the input or output shafts a bit in order for things to line up and move properly when shifting(rotating the drum to make things slide) Quote Link to comment Share on other sites More sharing options...
neo Posted March 17, 2011 Report Share Posted March 17, 2011 So that's the clutch cover off for finger (and thumbs) simultaneous rocking of the clutch unit and the drive sprocket. ... is that right Cope? Hope that works for you Matt. Best of balance. Neo Quote Link to comment Share on other sites More sharing options...
copemech Posted March 17, 2011 Report Share Posted March 17, 2011 So that's the clutch cover off for finger (and thumbs) simultaneous rocking of the clutch unit and the drive sprocket. ... is that right Cope? Hope that works for you Matt. Best of balance. Neo Yes, I doubt he has the clutch back on it from what he said. The actual engagement happens sliding the cogs sideways and may be interrupted depending upon their position. As things rotate a bit, then they can slide to lock in. I just hope he has not gotton things totally out of position here! Quote Link to comment Share on other sites More sharing options...
kendrick1992 Posted January 3, 2013 Report Share Posted January 3, 2013 I have a sherco 290 2003 model and it won't let me go any further then second gear only got 1st and second any ideas what could be please Quote Link to comment Share on other sites More sharing options...
copemech Posted January 4, 2013 Report Share Posted January 4, 2013 I have a sherco 290 2003 model and it won't let me go any further then second gear only got 1st and second any ideas what could be please Couple questions, Any idea when this issue began, or did you buy it that way? Does the shift lever return spring feel normal? Dose the 1-2 shift feel normal? Things like this usually occur after a hard hit to the shift lever, and if other things feel normal, may have bent an internal shift fork and require a teardown of the motor for inspection. Quote Link to comment Share on other sites More sharing options...
lineaway Posted January 4, 2013 Report Share Posted January 4, 2013 Cope, I had one awhile back break off one of those pins on the end of the drum. Quote Link to comment Share on other sites More sharing options...
copemech Posted January 5, 2013 Report Share Posted January 5, 2013 Cope, I had one awhile back break off one of those pins on the end of the drum. Yea, good point! I have never seen one break, yet the good thing about that would be the fact is should be evident with clutch removal and would not click up to the next pawl, if it is not there! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.