coxy Posted April 26, 2011 Report Share Posted April 26, 2011 Hi everyone I know that this question must of been covered hundreds of times on here but I'm wondering what ATF fluid to use, do you use a good make such as motul, castrol or putoline or do you just use any that's cheap? I've seen some castrol tq d3 I think it is from my local halfords and some castrol dexron 2 stuff aswell both in 1 litre would either of these be any good? Also at my local shop they stock putoline gp10 or light gear oil. Would you reccomend using this rather than the ATF fluid or not and why? Cheers coxy!! Quote Link to comment Share on other sites More sharing options...
legionnair Posted April 26, 2011 Report Share Posted April 26, 2011 Dextron 3 really any make will work if it meets the requirements to be classed as dextron 3 then go for it. I have switched to Canadian tire house brand dextron 3 because its cheap $4.25 per L I just change my oil a little more often to cover my ass. Later Dustin Quote Link to comment Share on other sites More sharing options...
huski Posted April 27, 2011 Report Share Posted April 27, 2011 Used dextron 3 from a motor factor in 5 diferent GasGas Pro,never had a problem. It's much cheaper this way well up to the job.We change it every 5 meetings Quote Link to comment Share on other sites More sharing options...
richt Posted April 27, 2011 Report Share Posted April 27, 2011 It is the spec you should look at. The brand is not important. I am using 'ATF Dextron III' same stuff, any brand. Quote Link to comment Share on other sites More sharing options...
ormplus Posted April 27, 2011 Report Share Posted April 27, 2011 used putoline light gear oil in dozens of gas gas,s and never had a problem. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.