joesimcock Posted May 7, 2011 Report Share Posted May 7, 2011 hi I have just put my new stickers on my sherco , I got them off eBay and they look really good . here is how to do it if you need help : 1. use a heat gun on your stickers to peel off without taking paint with them. 2. I used a spirit from the paint shop to wipe the plastics down and take all residue left behind off the plastics(forgot what it was , I will find out tomorrow). 3. heated up the plastics with heat gun. 4. put the stickers on (don't rush , just work out from the middle and when at the edges use heat gun to get rid of creases/air bubbles) 5. DONE ! (I was helped by my dad) Quote Link to comment Share on other sites More sharing options...
mikee Posted May 9, 2011 Report Share Posted May 9, 2011 I normanly put them on wet with a little bit of soapy water. They are easyer to get in the right place and you don't get air bubbles. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.