Jump to content

Techno Clutch Cover Seal?


mcman56
 Share

Recommended Posts

What type of seal is used on a 97 techno clutch cover? RTV silicone seems prone to leak. This bike had what appeared to be a ring of solder for a seal but it is no longer round so I can't tell the diameter. (I have heard of that before but can't remember where.)

Link to comment
Share on other sites

 

 
 
 

Aye, it's a round rubber O-ring. I put some new clutch plates in recenly and the seal was a swine to replace.

Once set free it seems to have life of its own and doesn't want to return to the darkness of the clutch housing.

I think I sould've put a new one in because, A - It wouldn't have been so distorted. B - It now leaks a few drops once the engine is really hot and C - It would have been kind to the old one to grant it it's freedom.

Link to comment
Share on other sites

 

Yep should be a large o ring.

Quite cheap to buy so probably best to get a new one.

I usuall put a couple of very small dabs of silicone in the groove to just hold the o ring in place whilst re-installing the case cover. Otherwise it tends to keep moving.

good luck :wacko:

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...