andygranger Posted May 23, 2011 Report Share Posted May 23, 2011 (edited) My newly purchased 07 250 has the dreaded water pump/clutch cover problem! I've ordered the bits and they'll be here tomos My question is....Which way round should the blue seal fit behind the impellor? To keep the water out of the oil(Spring in seal facing impellor) Or to keep the oil out of the water(Spring in seal facing gearbox) Mine is currently fitted so the spring is facing the impellor? I presume it is fitted this way as there will be more pressure coolant side than gearbox side? Cheers Andrew. Edited May 23, 2011 by Andygranger Quote Link to comment Share on other sites More sharing options...
technowaldo Posted May 23, 2011 Report Share Posted May 23, 2011 yes always put spring side to where the most pressure build up is going to be Quote Link to comment Share on other sites More sharing options...
si8433176 Posted June 4, 2011 Report Share Posted June 4, 2011 Spring to the impeller matey Quote Link to comment Share on other sites More sharing options...
joekarter Posted June 5, 2011 Report Share Posted June 5, 2011 (edited) On a related "we all need to keep this from continuing to happen" kinda note are you: Using the stock kill button switches? Using a "it doesn't react to mag" formula of coolent? Edited June 5, 2011 by joekarter Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.