zaccyboy Posted June 26, 2011 Report Share Posted June 26, 2011 Hi Folks, I own a Peugeot 1007 fitted with a Swan neck towbar, Im wanting to fit a bike rack instead of lugging a trailer around, anyone know of a clamp that fits onto the swan neck to allow the fitting of said bike rack. Thanks Folks Quote Link to comment Share on other sites More sharing options...
ross brown Posted June 26, 2011 Report Share Posted June 26, 2011 (edited) Had to get a bracket made for my towbar to accept a Dave Cooper rack. Essentially the bracket is a simple right angle "L" shape with an additional small tab welded on either side of the towbar so as to locate the bracket and stop it rotating/yawing on top of the towbar. Bracket sits on the swan neck and is held in place by the tow ball bolt. A wider and longer bolt was needed. The curved piece directly under the ball in the photo is actually a plastic washer to protect paint work - not structural at all. Having done all of this, I prefer my trailer as this swan neck is of the removable type so there is a pitching motion that occurs when driving over speed bumps and rougher ground. I never feel as comfortable as I would like when using it - short bar, fat bike, short drop, fat damages bill. See other threads on pros and cons of racks and tow ball weighting! Edited June 26, 2011 by Ross Brown Quote Link to comment Share on other sites More sharing options...
monty315r Posted July 9, 2011 Report Share Posted July 9, 2011 Hi Folks, I own a Peugeot 1007 fitted with a Swan neck towbar, Im wanting to fit a bike rack instead of lugging a trailer around, anyone know of a clamp that fits onto the swan neck to allow the fitting of said bike rack. Thanks Folks I've just bought a new car and had the same problem, luckily the swan neck is held on with two bolts so I just made a replacement bracket to carry the rack. I can post/email a photo if you want Quote Link to comment Share on other sites More sharing options...
scotig Posted August 3, 2011 Report Share Posted August 3, 2011 I've just bought a new car and had the same problem, luckily the swan neck is held on with two bolts so I just made a replacement bracket to carry the rack. I can post/email a photo if you want Hi mate,Iam on the same boat as you,having just bought a new Audi,with Detachable tow bar,have no way of fitting my Dave Cooper rack to it,could you post a pic of the replacement bracket you made. many thanks. Quote Link to comment Share on other sites More sharing options...
monty315r Posted August 3, 2011 Report Share Posted August 3, 2011 Hi mate,Iam on the same boat as you,having just bought a new Audi,with Detachable tow bar,have no way of fitting my Dave Cooper rack to it,could you post a pic of the replacement bracket you made. many thanks. Hi mate send me ur email and I'll email you a pic. I've only used it once and I'll probably not be using it again as it fflexes the bar too much! Quote Link to comment Share on other sites More sharing options...
Guest tobeee Posted August 4, 2011 Report Share Posted August 4, 2011 I know it's only a bit of simple welding to add a flange to a swan-neck bar, but in the UK that will be considered illegal and might invalidate insurance. Best not to give too much away about who you are and what you drive on a public forum! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.