shreddy Posted July 4, 2011 Report Share Posted July 4, 2011 I recently bought an 03 Gas Gas TXT Pro 125 and am just getting around to final fettling. It was running fine when bought, but I drained and filled with new petroil the other day. First time I started it all was OK. Started it again the other night (to warm it up and change gearbox oil), but it wouldn Quote Link to comment Share on other sites More sharing options...
dombush Posted July 4, 2011 Report Share Posted July 4, 2011 hi shreddy like you i dont think there is a link to the oil / fuel you put in. I put some thoughts down for you to think about. What changed (in detail) between before and after --you removed the fuel cap, did you pull on/dislodge the throttle cable -----at the throttle grip -----at the carb cap -----etc. -----etc. Does the carb slide make a nice thwack when you wind open the throttle and let go? Is the throttle cable kinked / frayed anywhere (inside the throttle housing?) Has the tickover screw been accidentaly been adjusted? Was the carb wobbled / tweaked unknowingly to create an air leak at the inlet rubber? Are the inlet rubber jubilee clips tight? Just a few ideas !! Good luck Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.