ivorspider1290 Posted July 10, 2011 Report Share Posted July 10, 2011 (edited) Hello Chaps Just sorting the last few jobs out on the old girl before she gets a good ride out. Been trying to figure out how to wire the new coil in today, have been looking at various wiring diagrams I have found on here and this is my problem. I only had 1 very knackered wire running from the back plate up to the old Dansi coil. I have no idea how many wire's I should have or where they should be attached to or from. The only wire I have is attached to the points and there is '3' small wires running to the 'resitor'? If anybody can please help with giving me a clue where I need to run wires from I sure I could work the rest out. I refuse to be beaten by this small set back. Have taken a photo on my BlackBerry but can't work out how to post so you could see what I'm on about. Any help would greatfull be acted upon. Just had a crash course in how to put photo's on here, so here goes hopefully it works. Edited July 10, 2011 by ivorspider1290 Quote Link to comment Share on other sites More sharing options...
blocky Posted July 10, 2011 Report Share Posted July 10, 2011 I always thought the 200's had electronic ignition but yours clearly has points. I think you may have the wrong coil for your bike Quote Link to comment Share on other sites More sharing options...
ivorspider1290 Posted July 11, 2011 Author Report Share Posted July 11, 2011 It seems that I ended up with a complete dog when it entered my workshop. This blooming bike has fought me all the way. I should have know it wasn't going to be easy when I had to use an angle grinder to take it to pieces. Looks like it's back to the drawing board on this one. Refuse to be beaten..........Thanks for the reply. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.