stanmet Posted September 23, 2011 Report Share Posted September 23, 2011 hicould any rtl owners tell me the measurement from centre of swinging arm spindle to front of rear spindle slot thanks stan Quote Link to comment Share on other sites More sharing options...
4stroke Posted September 26, 2011 Report Share Posted September 26, 2011 Hi measured with a tape, centre of spindle to front edge of rear axle slot = 440mm Quote Link to comment Share on other sites More sharing options...
stanmet Posted September 26, 2011 Author Report Share Posted September 26, 2011 Hi measured with a tape, centre of spindle to front edge of rear axle slot = 440mm hi thanks 4stroke same as mine workshop manual and other articals says 51 and three quarters wheelbase but the shortest i can get is 53 and a quarter it grips and steers ok but i was puzzeled about wheelbase thanks again stan Quote Link to comment Share on other sites More sharing options...
big john Posted September 26, 2011 Report Share Posted September 26, 2011 Why the interest in swinging arm length, is there a problem? Big John Quote Link to comment Share on other sites More sharing options...
stanmet Posted September 27, 2011 Author Report Share Posted September 27, 2011 hi big john its just my wheelbase was longer than the book says i just wonderd what was differnt nothing wrong just curious stan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.