andy m Posted October 26, 2011 Report Share Posted October 26, 2011 A common mod on the Bantam is to fit a crank weight usually brass, I am going to build a B175 engine which apparently has a heavier crank, does anyone know if, a. the weight is needed / used and b. who makes the weights. Thanks. Quote Link to comment Share on other sites More sharing options...
dave_t Posted October 28, 2011 Report Share Posted October 28, 2011 I see from another post you are going to the BMCA trial on Sun, suggest a word with Jim Pickering, he is one of the organisers, I believe he uses these on his Drayton Bantams, if not he will advise you, very helpful guy, I dont know if my Bantam has one as it was complete when I bought it, you are welcome to try it if we meet at a BMCA trial, will not make it on Sun as we (Stourbridge T.C.) have a trial Sat and will not have time, but hope to do the next two or three trials. Quote Link to comment Share on other sites More sharing options...
pitley Posted October 28, 2011 Report Share Posted October 28, 2011 I see from another post you are going to the BMCA trial on Sun, suggest a word with Jim Pickering, he is one of the organisers, I believe he uses these on his Drayton Bantams, if not he will advise you, very helpful guy, I dont know if my Bantam has one as it was complete when I bought it, you are welcome to try it if we meet at a BMCA trial, will not make it on Sun as we (Stourbridge T.C.) have a trial Sat and will not have time, but hope to do the next two or three trials. Dave, be worth coming down sunday, the venues a cracker Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.