yellow_cad Posted November 6, 2011 Report Share Posted November 6, 2011 Trying to clean up some of my cables on my 72 OSSA MAR. Had the clutch cable off and now the lever even with lots of movement on the clutch activating lever on the case will not disengage the clutch. It is like something is not correct with the clutch actuating rod. I believe there is a ball in there but not sure where it is or if it could have fallen out. Any thoughts would be appreciated. Jim in Folsom, CA Quote Link to comment Share on other sites More sharing options...
zerorev3rev4 Posted November 6, 2011 Report Share Posted November 6, 2011 trials clutches often stick when not in use for a while some bikes do it after 1 day you need to warm it up run it around with clutch held in if it doesnt come off try pulling away in 3rd clutch in and apply rear brake at same time Quote Link to comment Share on other sites More sharing options...
zerorev3rev4 Posted November 6, 2011 Report Share Posted November 6, 2011 warm bike up ride with clutch held in pull away in 3rd and apply rear brake Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.