Jump to content

puntcher repire kit


bondy
 Share

Recommended Posts

 

Bondy,

Its difficult to explain, but easy to do. Place the middle of the turd into the fork of the tool, then push the tool complete with turd through the hole in the tyre until about 15 to 20mm of the two ends of the turd are left sticking out, then gently pull the tool back out leaving the turd behind.

I've found that you may have to open the fork on the tool a little before you use it to avoid pulling the turd back out of the tyre.

Once done you can cut off the excess

Hope this helps

Link to comment
Share on other sites

 
 
 

Bondy,

Its difficult to explain, but easy to do. Place the middle of the turd into the fork of the tool, then push the tool complete with turd through the hole in the tyre until about 15 to 20mm of the two ends of the turd are left sticking out, then gently pull the tool back out leaving the turd behind.

I've found that you may have to open the fork on the tool a little before you use it to avoid pulling the turd back out of the tyre.

Once done you can cut off the excess

Hope this helps thanks i know what you mean so dose the turd harden in the hole? i wont need to take the wheel off then? allso one more quetion ive had the bike about five weeks when i got it home i put abit of fuel in ive only been round the garden the bike was serviced before i got it. will the fuel be ok for a wile im just gonner run it once a week ill only be using it in spring thanks all bondy

Link to comment
Share on other sites

 
 
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...