silverwood Posted December 14, 2011 Report Share Posted December 14, 2011 Hello everyone. I'm looking at buying a 315 and there is one for sale up north. It's an 01 model using the information in this thread but the owner thinks it is an 03. It is up for Quote Link to comment Share on other sites More sharing options...
ham2 Posted December 14, 2011 Report Share Posted December 14, 2011 (edited) Here's a few photos for reference....notice the rear caliper is flush with the swing arm on a 2001 (edit) onwards but stands proud on 2000 (edit) and earlier. I think the two 315s shown are a 2002 and a 1998:- http://garthe.smugmug.com/ADV-photos/2001-Montesa-315-R/IMG0008/710788199_dwGBL-L.jpg http://nmtrailboss.smugmug.com/photos/625852643_DJJGd-L.jpg Edited December 15, 2011 by HAM2 Quote Link to comment Share on other sites More sharing options...
manofsteele Posted December 14, 2011 Report Share Posted December 14, 2011 That's ballpark money I'd say. I paid a grand for my '01 about 4 years ago, it was a bit tatty and I threw another Quote Link to comment Share on other sites More sharing options...
hughesy Posted December 14, 2011 Report Share Posted December 14, 2011 (edited) If its the one up in Thurso I think its a 2000, showa forks and caliper on top of swingarm not inboard. You'll need front mudguard and bracket too. Room for bargaining. Excellent first bike in my opinion, as above expect to replace dog bone bearings, All Balls do a complete kit for £65 ish. Check usual, engine and frame no's haven't been tampered with (I "won" a 315 on ebay recently but the frame no's had been changed) Owner was genuine though and handed bike to Police. Edited December 14, 2011 by Hughesy Quote Link to comment Share on other sites More sharing options...
mad1 Posted December 14, 2011 Report Share Posted December 14, 2011 (edited) Hi my mate has a good 315r think its a 2001, its just had a new set of rings fitted and just been serviced, bog bone & wheel bearings were recently done, the bike has never let him down. he is lookin for around £850. if you pm me i could pass on his number for photos etc. SCOTLAND,CENTRAL AREA Edited December 14, 2011 by mad1 Quote Link to comment Share on other sites More sharing options...
smiffy Posted December 14, 2011 Report Share Posted December 14, 2011 Hi Ferg am glad you found the forum, hope you find it as informative as i have,i paid Quote Link to comment Share on other sites More sharing options...
silverwood Posted December 15, 2011 Author Report Share Posted December 15, 2011 notice the rear caliper is flush with the swing arm on a 2001 (edit) onwards but stands proud on 2000 (edit) and earlier. I think the two 315s shown are a 2002 and a 1998:- That's interesting. The design of that inboard caliper is stunning. Such a tidy design. Hi my mate has a good 315r think its a 2001, its just had a new set of rings fitted and just been serviced, bog bone & wheel bearings were recently done, the bike has never let him down. he is lookin for around Quote Link to comment Share on other sites More sharing options...
silverwood Posted December 15, 2011 Author Report Share Posted December 15, 2011 The bike has also had new front brake pads and rear wheel bearings! Quote Link to comment Share on other sites More sharing options...
serious3 Posted December 15, 2011 Report Share Posted December 15, 2011 (edited) doesnt sound too bad for the money, i've just bought my another as a present for my old lad and paid €900 for it although its a 99 model. i've had my 98 model for 2 years and had to do very little to it, chain and sprockets, wheel bearings etc. they are mechanically pretty much bombproof and i dont think you'll regret it. oh and the bracket that holds the front mudguard on is the brace. if you want to update the looks the fastest,easiest way is to heat the rear mudguard and make it more straight like a gasser/sherco etc! Edited December 15, 2011 by serious3 Quote Link to comment Share on other sites More sharing options...
nigel dabster Posted December 16, 2011 Report Share Posted December 16, 2011 is the carburation an issue on these? Quote Link to comment Share on other sites More sharing options...
serious3 Posted December 16, 2011 Report Share Posted December 16, 2011 is the carburation an issue on these? as in what way? mine starts 2nd kick from cold, first kick when hot, get the odd stutter sometimes but following my mates 2010 gasser the other day and his does the same! Quote Link to comment Share on other sites More sharing options...
manofsteele Posted December 16, 2011 Report Share Posted December 16, 2011 Mine seems to be over jetted but runs well enough. An industry fella told me recently that they did need some fettling and were known for some knock. Mine benefits from using super unleaded also. Quote Link to comment Share on other sites More sharing options...
ham2 Posted December 16, 2011 Report Share Posted December 16, 2011 is the carburation an issue on these? I knew a few bikes with a lean knock when rolling off the throttle...there was a jet and slide kit ( different venturi angle?) but mine was happiest with superdooper high RON fuel. Quote Link to comment Share on other sites More sharing options...
serious3 Posted December 16, 2011 Report Share Posted December 16, 2011 I knew a few bikes with a lean knock when rolling off the throttle...there was a jet and slide kit ( different venturi angle?) but mine was happiest with superdooper high RON fuel. i cant get super unleaded here, would octane booster help i wonder? the one i got for my old lad has a bit of knock rolling off alright Quote Link to comment Share on other sites More sharing options...
ham2 Posted December 17, 2011 Report Share Posted December 17, 2011 Yes to the octane booster just don't mix it in huge batches as I remember it absorbs water? (or degrades?) from contact with the atmosphere when you leave it standing. Sorry for the flaky memory but it's been a while since I used the stuff and I know it has it's downsides. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.