majesty320 Posted December 31, 2011 Report Share Posted December 31, 2011 Hi can anyone tell by how much down and back, people have altered the foot rest position on there 240 please. Also wheres the best place to get the rubber pad that protects the swing arm pivot. Thanks in advance Mark. Quote Link to comment Share on other sites More sharing options...
axulsuv Posted December 31, 2011 Report Share Posted December 31, 2011 (edited) Hi can anyone tell by how much down and back, people have altered the foot rest position on there 240 please. Also wheres the best place to get the rubber pad that protects the swing arm pivot. Thanks in advance Mark. A picture is worth a 1000 words ...And some are now spacing them out a little too ,for a slightly wider stance. As to the swingarm guard ,I found a spare on Ebay a few years ago , but you may want to contact Bill Pye ! He's got the fantic bits near you Glenn (and yes I need to clean my bike !!!) Edited December 31, 2011 by axulsuv Quote Link to comment Share on other sites More sharing options...
htrdoug Posted December 31, 2011 Report Share Posted December 31, 2011 I plan on dropping my pegs a bit lower than Glenn's,enough that I'll have to modify my brake pedal. Probably so that the bottom of the footpegs is even with the bottom of the frame rails. I do ride a modern Gasgas alot and my 309 is nice and low,moved my TY350 pegs down about that amount and it helped bunches. Quote Link to comment Share on other sites More sharing options...
lee harris Posted December 31, 2011 Report Share Posted December 31, 2011 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.