smallboy Posted January 12, 2012 Report Share Posted January 12, 2012 Hi all I want to remove the front pipe on my EVO 250,the two fixing bolts seem blocked by the frame,is ther a easy way of getting at them? Regards Quote Link to comment Share on other sites More sharing options...
chewy Posted January 12, 2012 Report Share Posted January 12, 2012 You are using a ball ended hex key? Chocolate versions of this tool ar definitly no good. Quote Link to comment Share on other sites More sharing options...
twinkletoes Posted January 12, 2012 Report Share Posted January 12, 2012 as above - decent ball-ended hex key, use a ring spanner on its short end for leverage. the pipe is slotted on the outside of the left hole so the left stud can be left in if required. slightly fiddly but easy enough once you've done it a time or two. Quote Link to comment Share on other sites More sharing options...
smallboy Posted January 12, 2012 Author Report Share Posted January 12, 2012 Thanks for your help,got to buy a allen key,anybody know the size? Quote Link to comment Share on other sites More sharing options...
pa. Posted January 13, 2012 Report Share Posted January 13, 2012 6mm from memory. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.