drongo Posted January 17, 2012 Report Share Posted January 17, 2012 Can anyone tell me how to lighten the clutch using a chain link, have seen it mentioned but not how its done. Quote Link to comment Share on other sites More sharing options...
totalshell Posted January 17, 2012 Report Share Posted January 17, 2012 do a search on these pages its in there somewhere plus a photo of another solution i was certainly a contributor i may have even stated the thread. Quote Link to comment Share on other sites More sharing options...
emmo1 Posted January 17, 2012 Report Share Posted January 17, 2012 do a search on these pages its in there somewhere plus a photo of another solution i was certainly a contributor i may have even stated the thread. [/quo Not sure about the chain link mod - but back in the 80's I used to extend the clutch arm and the fastener where the cable mounted the top of the crank case. There is not much room under the induction rubber so I made them long enough to run on top of it. Clutch never slipped and was much easier to operate Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.