ducman Posted February 15, 2012 Author Report Share Posted February 15, 2012 Here is Hans Cramer on the same bike during the Lamborell Trial Quote Link to comment Share on other sites More sharing options...
ducman Posted February 15, 2012 Author Report Share Posted February 15, 2012 (edited) And here we see him during the german round of the 1970 European Champinoship: Cheers:Mike Edited February 15, 2012 by Ducman Quote Link to comment Share on other sites More sharing options...
02-apr Posted February 15, 2012 Report Share Posted February 15, 2012 KTM used a Rotax motor, but couldn't get the rights as SWM had them at the time. Interesting Ross, I recall Walter's motor looking very KTM like and will have a photo somewhere but Big John will be able to save me several hours research in the photo box, no doubt. Quote Link to comment Share on other sites More sharing options...
pschrauber Posted February 15, 2012 Report Share Posted February 15, 2012 (edited) KTM used a Rotax motor, but couldn't get the rights as SWM had them at the time. Mmmh .... no They used their own engine parts, actually the biggest bottom and crank they could find which would be from a 400 or 440 cc engine and combined this with the cylinder from the 250cc. In the mid 70's KTM thaught as many factorys back then trials bike will sell easy in the next couple of years, and first ratings of the importers and dealers gave 4-digit numbers they could probably sell. So they started the project. Just when all the prototype job was over and Walter Luft and Krahnstöver had made their job in developing the bike the predicted numbers where only three digits just under thousend. KTM then abdonade any further production plans abruptly, (they just had annouced the bike to pubilc) but withdraw the bike from the big German bikeshow IFMA. Here the bike: To the Maico bike: (more important!): Very nice bike and thank's for the pic's with Hans Cramer! Edited February 15, 2012 by PSchrauber Quote Link to comment Share on other sites More sharing options...
b40rt Posted February 15, 2012 Report Share Posted February 15, 2012 Interesting Ross, I recall Walter's motor looking very KTM like and will have a photo somewhere but Big John will be able to save me several hours research in the photo box, no doubt. Might be wrong, sure I read an article stating that, will have to try and dig it out. Quote Link to comment Share on other sites More sharing options...
pschrauber Posted February 15, 2012 Report Share Posted February 15, 2012 Might be wrong, sure I read an article stating that, will have to try and dig it out. As my post #19 is a ultra short story, You find a little longer one here: Webermichel (comes from KTM's homecountry as riding a big bore two stroke KTM by myself). To the Maico, does the bike share some spec's/technic with the Bundeswehr Maicos back then? Quote Link to comment Share on other sites More sharing options...
b40rt Posted February 15, 2012 Report Share Posted February 15, 2012 Might be wrong, sure I read an article stating that, will have to try and dig it out. Was wrong, its was Walter Luft and Rotax, but it was Puch who had to give up due to SWM. Article in Classic Dirt Bike No 16. Also article on KTM trials in CDM No 18. Quote Link to comment Share on other sites More sharing options...
02-apr Posted February 23, 2012 Report Share Posted February 23, 2012 Mmmh .... no They used their own engine parts, actually the biggest bottom and crank they could find which would be from a 400 or 440 cc engine and combined this with the cylinder from the 250cc. In the mid 70's KTM thaught as many factorys back then trials bike will sell easy in the next couple of years, and first ratings of the importers and dealers gave 4-digit numbers they could probably sell. So they started the project. Just when all the prototype job was over and Walter Luft and Krahnst Quote Link to comment Share on other sites More sharing options...
b40rt Posted February 24, 2012 Report Share Posted February 24, 2012 Swinging arm looks short, in the pictures. Quote Link to comment Share on other sites More sharing options...
reginald Posted February 26, 2012 Report Share Posted February 26, 2012 Hi B40RT - the Puch trials bike prototyped with the rotax engine and then hit the road block you refer to.... Quote Link to comment Share on other sites More sharing options...
b40rt Posted February 26, 2012 Report Share Posted February 26, 2012 Hi Reginald,looks piston ported, not disc valve? Quote Link to comment Share on other sites More sharing options...
pschrauber Posted February 26, 2012 Report Share Posted February 26, 2012 Hi Reginald,looks piston ported, not disc valve? ... This bike was restored bei Helmut Hacker in Germany, he had a few ... Puch's as I know, He donated the bike to the Austrian trials museum. If you have any questions belonging technique ... you will find him at German Trials Forum www.trialforum.net, username: helmi-1. Quote Link to comment Share on other sites More sharing options...
b40rt Posted February 27, 2012 Report Share Posted February 27, 2012 Anybody know if this started out a a disc valve motor ? Quote Link to comment Share on other sites More sharing options...
ducman Posted February 29, 2012 Author Report Share Posted February 29, 2012 Anybody know if this started out a a disc valve motor ? No. Cheers:Mike Quote Link to comment Share on other sites More sharing options...
jhamiltonsmythe Posted March 15, 2012 Report Share Posted March 15, 2012 (edited) Anybody know if this started out a a disc valve motor ? Memory is a fickle thing,but I seem to remember that Walter Luft appeared at the SSDT on the original prototype which was then a Puch engined 170cc bike,not the Rotax version(.That came later and was hailed as the Yeti 300cc.) Walters bike had lots of nylon one-off bits on it to save weight,and looked "the biz". I have a photo but I dont know how to attach it.any help appreciated,thanks. Edited March 15, 2012 by jhamiltonsmythe Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.