magoo128 Posted February 22, 2012 Report Share Posted February 22, 2012 Hi there, I have just bought my first trails bike a Beta 250 2005. The bike was sent to me crated with the front wheel off and the spindle on the forks....Just a quick question with regards to a washer that was on the spindle...should this washer indeed be on there and would it be on the outside of the spacers...(poss at the Disk Side)??? I would have thought that there would have been nothing either side of the spacers but not sure. Any help with this would be greatly appreciated. Thanks. Quote Link to comment Share on other sites More sharing options...
mb4807 Posted February 22, 2012 Report Share Posted February 22, 2012 That goes up against the inside of the right hand fork leg, before the spacer. At least I hope it does as that is how I just put mine in. Quote Link to comment Share on other sites More sharing options...
b40rt Posted February 22, 2012 Report Share Posted February 22, 2012 Dont know specifically, but why not put wheel in place with axle through and see how the disc lines up ? It should tell you if spacer is required and position. Quote Link to comment Share on other sites More sharing options...
ducati996 Posted February 22, 2012 Report Share Posted February 22, 2012 Hi,on the beta 80 evo the washer is on outside of spacer opposite side to caliper,between spacer & fork leg Quote Link to comment Share on other sites More sharing options...
zerorev3rev4 Posted February 22, 2012 Report Share Posted February 22, 2012 That goes up against the inside of the right hand fork leg, before the spacer. At least I hope it does as that is how I just put mine in. this is correct Quote Link to comment Share on other sites More sharing options...
magoo128 Posted February 23, 2012 Author Report Share Posted February 23, 2012 Thanks Guys, Now on to the really stupid bit, when you are saying right hand fork are we talking on or in front of bike....or to make to make it easier for myself lol Disc side or non disc side??? I had put it on disc side between spacer and fork leg but the disc does seem to be rubbing a little. Quote Link to comment Share on other sites More sharing options...
mb4807 Posted February 23, 2012 Report Share Posted February 23, 2012 NON-Disc side. Quote Link to comment Share on other sites More sharing options...
fatbastard Posted February 23, 2012 Report Share Posted February 23, 2012 Mine is on Non DIsk Side . Quote Link to comment Share on other sites More sharing options...
crashmonkey Posted February 23, 2012 Report Share Posted February 23, 2012 So is mine Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.