alvin123 Posted February 27, 2012 Report Share Posted February 27, 2012 Hi, can someone please give me the size of the Allen key on the right hand side. I have undone the one on the caliper side. This is the first time I have taken the wheel out. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
tankygsy Posted February 27, 2012 Report Share Posted February 27, 2012 Think you'll find that's it chap, just give the spindle a tap from the calliper side and it will slide out. Have a look at picture 10 here: http://www.trialspartsusa.com/manuals/despiece_txt_pro_2011.pdf Quote Link to comment Share on other sites More sharing options...
smalley250 Posted February 27, 2012 Report Share Posted February 27, 2012 Have you undone the two 8 mm head bolts on each fork leg at the bottom, may have to remove disc cover. Quote Link to comment Share on other sites More sharing options...
alvin123 Posted February 27, 2012 Author Report Share Posted February 27, 2012 I have undone the three pinch bolts. Quote Link to comment Share on other sites More sharing options...
jse Posted February 27, 2012 Report Share Posted February 27, 2012 Think you'll find that's it chap, just give the spindle a tap from the calliper side and it will slide out. Have a look at picture 10 here: http://www.trialspartsusa.com/manuals/despiece_txt_pro_2011.pdf That should do it. Just be careful as the axle is aluminum. It's kind of a weird size, just slightly smaller than a 16mm Allen socket. If you run into unusual Allens like this one, you can make an "emergency" Allen wrench by fitting a nut that just fits into the Allen hole with a short piece of fuel line so that it will slightly protrude from a socket. That will get you by until you get the correct one. Jon Quote Link to comment Share on other sites More sharing options...
tightwire Posted May 25, 2012 Report Share Posted May 25, 2012 Think you'll find that's it chap, just give the spindle a tap from the calliper side and it will slide out. Have a look at picture 10 here: http://www.trialspartsusa.com/manuals/despiece_txt_pro_2011.pdf Quote Link to comment Share on other sites More sharing options...
gumby26 Posted May 26, 2012 Report Share Posted May 26, 2012 There are (4) pinch bolts,..(2) per leg. Hope this helps ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.