cabby Posted March 15, 2012 Report Share Posted March 15, 2012 Can anyone point me in the direction of where I can buy a rear brake pedal push rod ?? The original pedal was snapped so ordered another, now I notice the original push rod doesn't detach from the broken lever, and I can't find a push rod from where I got the new lever. Thanks in advance. Quote Link to comment Share on other sites More sharing options...
hrc1 Posted March 15, 2012 Report Share Posted March 15, 2012 Later ones are rivetted on. Search "Motomerlin + RQF"........ Quote Link to comment Share on other sites More sharing options...
copemech Posted March 16, 2012 Report Share Posted March 16, 2012 Can you not drill off the rivet and install a pin from an earlier model. Quote Link to comment Share on other sites More sharing options...
arnoux Posted March 16, 2012 Report Share Posted March 16, 2012 What model bike, and were are you located? Quote Link to comment Share on other sites More sharing options...
thats_a_five Posted March 18, 2012 Report Share Posted March 18, 2012 I would just grind or drill one end of the rivet away, drive out the remaining part and replace it with a hitch pin and cotter pin or bolt and self locking nut depending on clearance. That way if you need to, you can simply unbolt it and move it to another pedal. Quote Link to comment Share on other sites More sharing options...
bigfoot Posted March 19, 2012 Report Share Posted March 19, 2012 I bought a nice red one from motomerlin and it came without the pushrod too. I drilled out the end of the rivet on the old and installed it on the new. The new one did come with the rivet I needed though. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.