mudyman Posted March 18, 2012 Report Share Posted March 18, 2012 hey guys can any one say what size socket fits the nut (left hand thread) on the final drive to change the front sprocket ? Thanks all Ian Quote Link to comment Share on other sites More sharing options...
bisby Posted March 18, 2012 Report Share Posted March 18, 2012 36mm across flats, bigger than anything i have, i use hammer and chisel method Quote Link to comment Share on other sites More sharing options...
stecks Posted March 18, 2012 Report Share Posted March 18, 2012 can't you borrow a socket or a spanner...? OSSAs need tlc... Quote Link to comment Share on other sites More sharing options...
mudyman Posted March 19, 2012 Author Report Share Posted March 19, 2012 Hi Bisby I will do what you suggest if nothing else helps, but I wanted to buy or borrow a socket that fits as Stecks suggested I now know its a 3/4 drive socket as 1/2 only go up to 32 mm. Thanks again Ian Quote Link to comment Share on other sites More sharing options...
wayne_weedon Posted March 19, 2012 Report Share Posted March 19, 2012 Hi Bisby I will do what you suggest if nothing else helps, but I wanted to buy or borrow a socket that fits as Stecks suggested I now know its a 3/4 drive socket as 1/2 only go up to 32 mm. There are plenty of 1/2" drive 36AF sockets available. Try ebay, I would use an impact type with a full hex. Quote Link to comment Share on other sites More sharing options...
stecks Posted March 19, 2012 Report Share Posted March 19, 2012 I just Googled 36mm socket and this lot popped up http://www.ebay.co.u...w=socket&_dmd=2 Some look as though they are made of mild cheese, but perhaps one of the impact sockets might last long enough to get the sprocket off, and with a bit of luck, back on again. Some of them are driven by 1/2" drives, but I think I'd go for a bigger drive than that... And on the up side, if you get one, we can all borrow it... Quote Link to comment Share on other sites More sharing options...
bisby Posted March 20, 2012 Report Share Posted March 20, 2012 never thought to look on e by might have to treet bike to a new part, thanks. steve Quote Link to comment Share on other sites More sharing options...
mudyman Posted April 2, 2012 Author Report Share Posted April 2, 2012 I must be getting very old as I´v found a Socket in the Trials-Tool-Box. Suddenly rememberd seeing one there (things like taht are VERY strange and sometimes a bit worrying) ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.