scot taco Posted February 15, 2013 Report Share Posted February 15, 2013 I just came in from a little work on the TY250.I hope there is a good turn out of vintage bikes at the Tilton trials this year.I,ve never been there so it wiil be nice to meet some other twin shockers and check out their bikes.I will probably bring a couple of bikes so I have a back up.Don,t know if the rules are the same there,but in district 17 if you switch bikes you are disqualified,but if I,m going to drive that far I want to ride all day whether it counts or not. 1 Quote Link to comment Share on other sites More sharing options...
junker2k Posted February 15, 2013 Report Share Posted February 15, 2013 I have cut the back bone other frames and changed the fork angle and I can tell you this is much easer to add a new steering head. Nothing else has to be changed or moved. The reasons I did it this way on the TY is #1 change the fork angle to 24 degrees and #2 I am 6 foot 2 and the TY175 doesn't leave me much rum to work, it is really cramped. As for the angle of the rear shocks on the Hojaka they work very well at the angle. I had to change the springs to stiffer ones and had to add a stop on the shaft because it was getting too much travel for the vintage class. There is very little if anything on this bike that is stock as built in 1974. Quote Link to comment Share on other sites More sharing options...
motovita Posted February 15, 2013 Report Share Posted February 15, 2013 #2 I am 6 foot 2 and the TY175 doesn't leave me much rum to work, it is really cramped. OK now ya got me curious. Why take a small bike and make it bigger instead of getting a bigger bike in the first place and getting some more power in the process? The colors look great. Seeya soon. Quote Link to comment Share on other sites More sharing options...
htrdoug Posted February 15, 2013 Report Share Posted February 15, 2013 Probably because "light makes right!" 1 Quote Link to comment Share on other sites More sharing options...
junker2k Posted February 16, 2013 Report Share Posted February 16, 2013 Motovita, We will talk about that in a few weeks. Weight, agile, good power and very good handling. Quote Link to comment Share on other sites More sharing options...
steve fracy Posted February 20, 2013 Report Share Posted February 20, 2013 trying to load picture of my new 200 that just came home...not sure if this will work! 2 Quote Link to comment Share on other sites More sharing options...
ikb Posted February 20, 2013 Report Share Posted February 20, 2013 Cosmetically finished, after 2 years use! 4 Quote Link to comment Share on other sites More sharing options...
crowley Posted February 22, 2013 Report Share Posted February 22, 2013 (edited) I've just finished building this XL 250 and I prefer riding it to my Fantic 300 I've altered the fork angle, shortened the swinging arm and raised the motor a bit. A 26mm Moltk carb and some Betor shocks make it handle really well. The bottom end torque from the heavy flywheels is quite astonishing. Edited February 22, 2013 by crowley 1 Quote Link to comment Share on other sites More sharing options...
guys Posted February 22, 2013 Report Share Posted February 22, 2013 Nice job! Quote Link to comment Share on other sites More sharing options...
bashplate Posted February 23, 2013 Report Share Posted February 23, 2013 Nice work crowley, I like specials, and that is well done. Quote Link to comment Share on other sites More sharing options...
johnwayne22 Posted February 23, 2013 Report Share Posted February 23, 2013 cota 200 90 percent finished now on 1st oversize piston, runs awesome. 1 Quote Link to comment Share on other sites More sharing options...
htrdoug Posted March 3, 2013 Report Share Posted March 3, 2013 Almost ready for Trials Inc. Vintage Cup! gotta beat all those TY175's!!!(Unfortunately all those guys can really ride) 2 Quote Link to comment Share on other sites More sharing options...
canadaler Posted September 12, 2013 Report Share Posted September 12, 2013 (edited) 1985 Cagiva (Merlin) TR3.50 Been riding local vintage trials with it this year and having fun. Not restored, this bike saw very little use before I bought it. I put on new front fender brackets, fenders, Renthal bars, rebuilt the forks, added Seal Savers, cleaned it up and went riding. Oh...using "Tubliss" system in the rear wheel with new Dunlops front and back. Edited September 12, 2013 by canadaler 2 Quote Link to comment Share on other sites More sharing options...
gary tb Posted September 12, 2013 Report Share Posted September 12, 2013 2 Quote Link to comment Share on other sites More sharing options...
mick Posted September 16, 2013 Report Share Posted September 16, 2013 1980 SWM 320 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.