danster Posted March 29, 2012 Report Share Posted March 29, 2012 I recently broke the pivot hole out of the top yolk and bent the pivot post so I am trying to find a replacement. The beta synt has USD forks with an upper dim of 47mm and the lower dim of 48ish mm and the 2 fork holes in the yolks are 122mm from each other. I have seen a couple of beta yolk sets on ebay.uk for newer bikes one for a rev3 and one from a techno or zero but would like to know if they will fit or if there is any other options. Quote Link to comment Share on other sites More sharing options...
tlrmark Posted March 29, 2012 Report Share Posted March 29, 2012 Hi...I know where there is a Beta Alp which is the early version of the Synt, on Vancouver Island. It has the upside down forks like yours. It has a bad stator and has been sitting at a local bike shop for ten years. It could be bought as a parts bike cheap. I dont think I am allowed to mention the name of the bike shop on here as per the forum rules. Quote Link to comment Share on other sites More sharing options...
danster Posted March 30, 2012 Author Report Share Posted March 30, 2012 I sent you a PM Quote Link to comment Share on other sites More sharing options...
danster Posted April 7, 2012 Author Report Share Posted April 7, 2012 All sorted now I picked up that Alp you mentioned and used the upper yolk and the pivot shaft. Then sold the bike to a guy in up island. Thanks for the tip. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.