trialholic Posted April 11, 2012 Report Share Posted April 11, 2012 Hi I want to change brakes (front and rear) and clutch fluid in a Evo 300 4T and I need to know roughly how much amount of fluid will I need. I want to try MOTUL RBF 600 wich comes in 500ml bottles, so how many bottles should I order, 1, 2? Thanks Quote Link to comment Share on other sites More sharing options...
lineaway Posted April 11, 2012 Report Share Posted April 11, 2012 Only one unless you have a bad day! Quote Link to comment Share on other sites More sharing options...
trialholic Posted April 11, 2012 Author Report Share Posted April 11, 2012 Ok, Thank you Quote Link to comment Share on other sites More sharing options...
pindie Posted April 11, 2012 Report Share Posted April 11, 2012 One is enough to do a couple of bikes! I use a long piece (1.5m) of clear plastic tube over the nipple. Attach to the nipple to bleed and use a rubber band to attach it to the handlebars. You now have a system where air cant get in and you can see the fluid coming through. Suck out the master cylinder and fill with new fluid. Bleed as per normal. I find that once the pipe is filled up during bleeding it is enough to bleed through air, dirty fluid and new fluid (you will see a colour change). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.