stevieb Posted April 14, 2012 Report Share Posted April 14, 2012 (edited) Preparing my SY175f for a trial this morning, the bike 'blew over' in the wind and fell onto the left side, the gear lever took the blow and punctured the engine casing, end of day !! My problem now is findind a replacement casing & gasket, i know that it is a Yamaha TTR engine, but is this an import and are engine parts easily available ? I haven't have a great deal of joy in the past sourcing Scorpa parts. Other than Birketts, can anyone advise where else I can sort this problem ?? Edited April 14, 2012 by stevieb Quote Link to comment Share on other sites More sharing options...
archie Posted April 14, 2012 Report Share Posted April 14, 2012 http://www.ebay.co.uk/itm/YAMAHA-TTR-125-engine-stator-coil-and-cover-/130605759003?pt=UK_Motorcycle_Parts&hash=item1e68b5ba1b http://www.ebay.co.uk/itm/YAMAHA-TTR-125-STATOR-COIL-COVER-/180613990024?pt=UK_Motorcycle_Parts&hash=item2a0d6ec688 Two for starters Quote Link to comment Share on other sites More sharing options...
stevieb Posted April 14, 2012 Author Report Share Posted April 14, 2012 Thanks Archie, the first one does look similar, but it's not the same & the second one, again looks similar and would probably get me out & riding until I could find a new/newer one. I'll have a good look through Ebay. Quote Link to comment Share on other sites More sharing options...
archie Posted April 14, 2012 Report Share Posted April 14, 2012 stevieb, I think you'll find it's the same casting. The second one does look a bit rough mind (!), but nothing that a bit of high build primer and a silver top coat won't sort. All the Scorpa four stroke 125/175/200 derivaties are based upon a stock TTR125 engine, and so casings etc., are usually pretty easy to find. The gaskets are pretty expensive, but can usually be re-used if removed carefully. There is a load of info on this forum on mods to these bikes as well which is worth checking out (if you havn't allready) which is where I got allot of useful info when I got my bike. Quote Link to comment Share on other sites More sharing options...
stevieb Posted April 14, 2012 Author Report Share Posted April 14, 2012 Thanks, I also need a gear lever, does anyone know if its the same as the SY250 2t ? Quote Link to comment Share on other sites More sharing options...
jtrials31 Posted April 25, 2012 Report Share Posted April 25, 2012 This apparently happened to my SY250 as well, but it has been jb welded so it just looks bad. Are they relatively easy to find for them as well? And where abouts on the price range? Quote Link to comment Share on other sites More sharing options...
stevieb Posted April 25, 2012 Author Report Share Posted April 25, 2012 (edited) I managed to repair the casing to get riding again, but have since bought a new Yamaha casing (£60) and a slightly shorter gear lever (£36) from Birketts. My mate has ridden my bike & is so impressed he 'has to have one' but there doesn't seem to be any about for sale, anyone know of a good 175/200f up for grabs please let me know. Edited April 26, 2012 by stevieb Quote Link to comment Share on other sites More sharing options...
archie Posted April 26, 2012 Report Share Posted April 26, 2012 stevieb, I may be able to help you. Drop me a PM. Regards Archie Quote Link to comment Share on other sites More sharing options...
godzilla Posted May 2, 2012 Report Share Posted May 2, 2012 Jtrials31 - is it the clutch or stator case you need? Quote Link to comment Share on other sites More sharing options...
stevieb Posted May 3, 2012 Author Report Share Posted May 3, 2012 Thanks, I have repaired the damaged casing & bought a new one. Steve Quote Link to comment Share on other sites More sharing options...
jtrials31 Posted May 4, 2012 Report Share Posted May 4, 2012 Clutch side. The other side is very scratched up but I think it will still polish out when I get around to it Quote Link to comment Share on other sites More sharing options...
godzilla Posted May 5, 2012 Report Share Posted May 5, 2012 Clutch side cases for 250 2T are around £450 \ $725 new, used ones come up for sale every so often. I have a nice one in my spares box. Quote Link to comment Share on other sites More sharing options...
stevieb Posted May 5, 2012 Author Report Share Posted May 5, 2012 Thanks very much but I am now sorted. Steve Quote Link to comment Share on other sites More sharing options...
jtrials31 Posted May 10, 2012 Report Share Posted May 10, 2012 Clutch side cases for 250 2T are around £450 \ $725 new, used ones come up for sale every so often. I have a nice one in my spares box. Yikes! It might be a while before that gets replaced then! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.