stuessenhigh Posted April 22, 2005 Report Share Posted April 22, 2005 Hi all...this is probably a real dumb question...and if I tried hard enough, I'd probably work it out myself...BUT...with my luck I'd probably break it!!...so can anyone tell me, how do I remove the silver plastic bit in the picture..so I can clean underneath, and re-seat the black plastic/cable holder bit. THanks in advance for any help Quote Link to comment Share on other sites More sharing options...
landrover Posted April 22, 2005 Report Share Posted April 22, 2005 HI STU, unscrew you filler cap and remove, then use a small pick or screw- driver and remove the rubber 'o' ring around the filler neck and then lift off the plastic cover replace in reverse Quote Link to comment Share on other sites More sharing options...
kinell Posted April 22, 2005 Report Share Posted April 22, 2005 The rubber boot never stayed in place on my 02 and 04 Beta's but it's fine on the 05 bike! Don't know why though - maybe a dab of silicone would help Stu Quote Link to comment Share on other sites More sharing options...
stuessenhigh Posted April 22, 2005 Author Report Share Posted April 22, 2005 Thanks both...yep the rubber boot thing stayed put on my 02 Beta..but on this 03 one, its never stayed put...but now I know how to lift the plastic bit..(thanks landrover!) I can try to sort it out. Cheers both STU Quote Link to comment Share on other sites More sharing options...
bob Posted April 22, 2005 Report Share Posted April 22, 2005 you can poke it down using a small flat screwdriver if you can't be bothered to take it off. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.