seann Posted April 18, 2012 Report Share Posted April 18, 2012 I've got a 1984 300, hasn't run for about 5 years, did get "wet" that led to starting problems....cleaned up stator plate but now wants to attemp to break ankles (kickback) instead of starting. Took apart and set up rotor/ignition plate in lathe to simulate spinning and couldn't make a spark. Have changed HT coil. I've been told that a stator plate from a Vespa or a Gas Gas will replace the original "ZEM" unit. Can the pickup coil alone be purchased? Spring in Ontario, I have 100 acres of forested land being wasted.... Seann Quote Link to comment Share on other sites More sharing options...
axulsuv Posted April 21, 2012 Report Share Posted April 21, 2012 Contact these folks (great references , I've heard ) http://www.westcountrywindings.co.uk/ I believe they can sort out your issues , And I'm not gonna go near the whole set up on a lathe thing ... To many variables to even consider ... And when you get your bits back , set it up with a new kill switch and all new wires , inc. plug lead and boot . If it's kicking back you've got the timing way to advanced I think .? Glenn Quote Link to comment Share on other sites More sharing options...
axulsuv Posted April 29, 2012 Report Share Posted April 29, 2012 ARE WE ALIVE ???? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.