si8433176 Posted June 15, 2012 Report Share Posted June 15, 2012 Hi guys, a quick question: I want to change the fuel filter on my 2011 250. there isnt a fuel tap, so when i take the filter off i'm guessing the fuel is just going to poor out all over the place. how should i best go about it? Thanks in advance. Si Quote Link to comment Share on other sites More sharing options...
cabby Posted June 15, 2012 Report Share Posted June 15, 2012 Bulldog clip/pliers etc to clamp the fuel tube. 1 Quote Link to comment Share on other sites More sharing options...
lee99780 Posted June 15, 2012 Report Share Posted June 15, 2012 Kink it over and cable tie it kinked, it shouldn't damage it then Quote Link to comment Share on other sites More sharing options...
2stroke4stroke Posted June 15, 2012 Report Share Posted June 15, 2012 Or the obvious - pull the tube off the carb and let it drain in to a petrol can? Quote Link to comment Share on other sites More sharing options...
si8433176 Posted June 16, 2012 Author Report Share Posted June 16, 2012 Thanks for your help guys, When i bought it I'm sure the salesman said something about the fuel level being half empty, or full, or something like that, would prevent the fuel coming out. i cant remember now, but I'll use the obvious blocking the pipe. cheers si Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.