villiersprodigy Posted June 15, 2012 Report Share Posted June 15, 2012 Hi does any one know what the settings are required for a 26 mm flat slide carb on a 315. A friend as let me borrow one to try to see the difference in performance against the standard dellorto carb. Quote Link to comment Share on other sites More sharing options...
copemech Posted June 16, 2012 Report Share Posted June 16, 2012 Hi does any one know what the settings are required for a 26 mm flat slide carb on a 315. A friend as let me borrow one to try to see the difference in performance against the standard dellorto carb. As the OKO is simply a Kiehin copy in 26mm version, I would think the base settings for the Kiehin should apply directly to this application. 45 pilot, 125 main JJH needle in mid clip position This should give you a good start if you are reasonably close to this and you might need to refine a bit from there. Hope that helps! Quote Link to comment Share on other sites More sharing options...
villiersprodigy Posted June 16, 2012 Author Report Share Posted June 16, 2012 Thanks for the info, i will try those settings and when the bike is runnig right ill let you know how it goes in comparision to the standard dellorto. Quote Link to comment Share on other sites More sharing options...
copemech Posted June 17, 2012 Report Share Posted June 17, 2012 Might mention float heights settings can be a bit iffy on these depending upon application(attitude of carb). If you get into problems on downhills, get back for further reccos! Cheers, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.