wasted Posted July 1, 2012 Report Share Posted July 1, 2012 pulled the waterpump out ,all looks good / help me please,dont know if and where the seal is leaking or wot else is causeing the oil and water to emulisifying Quote Link to comment Share on other sites More sharing options...
spenser Posted July 1, 2012 Report Share Posted July 1, 2012 The most common place for the water to get into the oil is past the water pump seal. The seal may look fine, but the seal wears a groove in the shaft at the point of contact, making the shaft smaller at that point resulting in a loose seal. I have yet to see a Gas Gas Pro where this didn't happen, so it would be good to replace the seal and shaft at regular intervals (annually) just to be on the safe side. Quote Link to comment Share on other sites More sharing options...
wasted Posted July 2, 2012 Author Report Share Posted July 2, 2012 Thanks this help alot will replace both an see if this solves the problem Quote Link to comment Share on other sites More sharing options...
spenser Posted July 4, 2012 Report Share Posted July 4, 2012 Keep us up to date on the progress, working out these problems helps all of us here on the interweb. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.