kuma Posted July 22, 2012 Report Share Posted July 22, 2012 (edited) I have a 300 Pro and need a flywheel nut, I've been told that it is a 15 X1.5 can not locate one in the US. Edited July 22, 2012 by kuma Quote Link to comment Share on other sites More sharing options...
goudrons Posted July 22, 2012 Report Share Posted July 22, 2012 try http://www.nickandkaren.co.uk/frankfieldfantic.co.uk/ or http://www.r2wtrials.co.uk/html_files/bobwright.html Either should be able to post one out. Failing that, an engineer should be able to turn one up and cut the right thread for you if they can't supply a suitable one already. Quote Link to comment Share on other sites More sharing options...
axulsuv Posted July 22, 2012 Report Share Posted July 22, 2012 Kuma ; Sorry I haven't got back to you yet , been real busy lately (opened a new shop) . But I was out cleaning up my shop at home yesterday and didn't run across one in all my spare engine parts , but I've got a couple other boxes of hardware to look thru yet today . I'll let you know something later today one way or the other ... Glenn Quote Link to comment Share on other sites More sharing options...
axulsuv Posted July 23, 2012 Report Share Posted July 23, 2012 PM me your contact info and I can hook you up ... Glenn Quote Link to comment Share on other sites More sharing options...
totalshell Posted July 23, 2012 Report Share Posted July 23, 2012 had a box of Gas Gas bits that i ebayed.. guy rang up and said have you a stepped bolt and included a drawing .. i said yes and asked a fiver.. he sent me 30 quid as it was unobtainium!! Quote Link to comment Share on other sites More sharing options...
kuma Posted July 24, 2012 Author Report Share Posted July 24, 2012 PM me your contact info and I can hook you up ... Glenn Info PM'd Thanks! Quote Link to comment Share on other sites More sharing options...
kuma Posted July 30, 2012 Author Report Share Posted July 30, 2012 Mike at the Tryals Shop came through, got it Now I need parts to referbish the shocke or buy some new. anyone know where to get replacement rubber inserts that go in the ends? Quote Link to comment Share on other sites More sharing options...
axulsuv Posted July 30, 2012 Report Share Posted July 30, 2012 And I just now got around to writing down your address and putting it and the nut in my lunch box/cooler ...!!! Does it Run ?????? Quote Link to comment Share on other sites More sharing options...
kuma Posted August 6, 2012 Author Report Share Posted August 6, 2012 I had aquired this buke for a trade some years back and it alway ran well but never really ran it very much, good thing, I'm currently going through it cosmetically and found that the nut was missing, figured I had better not push my luck and get one before the flywheel comes off. I have not started since the new powder coat, I still need to do something with the shocks, repalce or repair. I want to repair to keep the bike as original as I can. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.