Jump to content

Ty250A Carb Swap ?


robf
 Share

Recommended Posts

Hi guys

Can I swap the standard TK carb for a 26mm Mikuni as a straight swap ?

Is the inlet rubber and the air filter hose the same ?

I am assuming that I can just get a Mikuni and pop it on but I decided it might be sensible to ask first

... Rob

Link to comment
Share on other sites

 

 
  • 2 weeks later...
 
 

Update ...

After fitting the carb and throwing in some fresh petrol the bike still wouldn't start

I had put a new plug in but the spark was VERY weak and I decided to go straight to an electronic ignition kit rather than muck about with the points ( lazy I know )

After fitting the kit ( from TY Trials ) I gave the bike a half hearted kick on the kickstart to get some fuel in the cylinder and it started first kick :-)

It sounds very bunged up ( exhaust I assume ) but after setting the tickover it actually will sit on tickover

At least now I have a running bike ( a very ugly running bike )

Link to comment
Share on other sites

 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...