scorpa 4 dean Posted August 19, 2012 Report Share Posted August 19, 2012 Hi All, My son in law has been riding my Beta Rev 3 and i noticed that the rear tyre is touching the inside of the silencer. He is a tall big framed lad weighing about 15.5 stone. I was considering adjusting the suspension to make it stiffer but not sure how to set up the front to match the back. (dont want to offset the suspension) the only other option is to add some spacers to where the silencer is bolted to the frame and bring the exhaust out a bit from the frame. Anybody know what the best solution is to cure this before the tyre or exhaust ends up with a hole. Quote Link to comment Share on other sites More sharing options...
Andy Posted August 19, 2012 Report Share Posted August 19, 2012 Topic moved AGAIN. Please post bike-specific topics in the relevant bike forum as per the bold, red text on the General forum ONLY START A TOPIC IN GENERAL TRIALS TALK IF THERE IS NOT A MORE SUITABLE FORUM. FOR BIKE-SPECIFIC QUERIES POST IN THE RELEVANT BIKE FORUM. FOR UK TOPICS, POST IN THE DEDICATED UK FORUMS Quote Link to comment Share on other sites More sharing options...
lineaway Posted August 19, 2012 Report Share Posted August 19, 2012 He had to push it in. Lay it down and pull it back out. If you have the stock muffler you should have plenty of room. Also check the middle muffler mounts to see if they are the proper parts. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.