guy53 Posted August 21, 2012 Report Share Posted August 21, 2012 I bought a 44 H TY mono a few weeks back, fixed the igniton and put it in the shed while I finish a TS project, this weeckend I made a few round behind the house to find it very VERY " SLUGGISH " so I took the carb off cleaned it put it back with no improvements. I'm sure the exhaust need's a good cleane up but still I think the carb need's fixing. I have " on the shelve " a new roung slide 26 mm Mikuni ( VM type ), is it a good idea to try it on ? Or am I loosing my time, I know I have to modify the flywheel. but I have to start somewhere. Guy Quote Link to comment Share on other sites More sharing options...
feetupfun Posted August 21, 2012 Report Share Posted August 21, 2012 Guy from memory the modern off-the-shelf VM26 is a physically bigger carby than the standard carby so it may not fit in the space available Quote Link to comment Share on other sites More sharing options...
guy53 Posted August 21, 2012 Author Report Share Posted August 21, 2012 Big weekend of fun comming up, 4 days with Mick Andrews ( I hope the wheater will cooperate ) first thing I'll check when I come back is the size of the VM, I had both carb 5 feet apart this saterday and did'nt think of that. Guy Quote Link to comment Share on other sites More sharing options...
baldilocks Posted August 21, 2012 Report Share Posted August 21, 2012 tried a yam with a pwk 28 keihin fitted that was really good but you would need to make an adaptor for air intake. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.