nigel dabster Posted October 8, 2012 Report Share Posted October 8, 2012 like this? Quote Link to comment Share on other sites More sharing options...
nidom Posted October 9, 2012 Report Share Posted October 9, 2012 Hi Nidom,sounds an exciting way of getting tyre on but what happens when u dont get everything just right ? Too little or too much bang (we had a wheel jump about a foot in the air on an early experiment), very dependant on gas mixture & quantity. The air needs to be turned on just after explosion, or the cooling gases contract & pull the tyre back off the rim (just had a thought, wonder if a vac pump would work as a bead breaker?). This was very early days of tubeless rim & there were all sorts of horror stories of grown men close to tears! Our method was a bit more dramatic than Nigels clip, but that was the type of thing that got me thinking. Happy memories of friends hiding round corner! I now use a Jitsie tyre beader, proper tyre soap & a £100 compressor. It's dead easy with practice, turned an X lite in 5 mins Sat night. I like to get the trye on rim without levers as reduces any chance of damage. I don't bother pre forming or warming tyres, they sit in garage, but a good idea if you are stuggling. Good luck & post how you get on, a friend is about to try his first tyre also. Quote Link to comment Share on other sites More sharing options...
juanroberts Posted April 28, 2019 Report Share Posted April 28, 2019 Tried ether, and the ratchet tie down method. I an leaving it with an inflated tube overnight. If this fails, I will have to get the beader and wait for it to arrive. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.