Jump to content

Advice On This Shock?


theomo
 Share

Recommended Posts

I purchased this shock to replace my old nackered one, looked absolute spot on when I recieved it. Fitted it, went on absolute fine, dropped the bike off the stand to find this ring floating about!

shock1.jpg

shock2.jpg

I'm a noob when it comes to shocks, I cannot find an exploded diagram or any information atall on this model of shock. The seller is telling me it's just a dust cover/seal, but I'm not so sure.

Can anyone shed some light on this? Is the shock nackered? Cheers.

Link to comment
Share on other sites

 

Im not all that knowledgeable on shocks, but my "BEST" bet is, that this is the DUST seal at least, otherwise you would have lost oil and any dampening (shock absorbing) and it would ride like a pogo stick. It probably has some kind of crimp that held it onto the end of the shock reservoir? I'd take the shock back off and see if you can't get it back into place. If you bought the shock "retail" or ebay, return it, let them fix it.

Edited by sting32
Link to comment
Share on other sites

 
 

I was suggesting take it back off so he could see what is going on, mostly. might need to adjust it a little to make it clamp like it is supposed to, without hurting anything else (being awkward to work laying on floor looking up through frame of the bike, while doing this for the 1st time and all... YMMV

:popcorn:

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...