max Posted November 13, 2012 Report Share Posted November 13, 2012 (edited) Hi guys, Can someone please remind me the standard settings - pilot jet / mixture screw AND idle / throttle stop screw - for the Amal carb on a 250cc model 150 sherpa It is on standard jets. Thanks very much. Max Edited November 13, 2012 by max Quote Link to comment Share on other sites More sharing options...
bondy Posted November 13, 2012 Report Share Posted November 13, 2012 hi mate a good place to start is bottom the air screw then turn it 2 and a half turns out. then once the motor as warmed ajust the idle there really is no standard seting. its just trial and error. Quote Link to comment Share on other sites More sharing options...
max Posted November 14, 2012 Author Report Share Posted November 14, 2012 hi mate a good place to start is bottom the air screw then turn it 2 and a half turns out. then once the motor as warmed ajust the idle there really is no standard seting. its just trial and error. Thanks Bondy - I'll give that a go. Cheers, Max Quote Link to comment Share on other sites More sharing options...
bondy Posted November 14, 2012 Report Share Posted November 14, 2012 make sure you turn it clock wise to bottom it. then turn it antie clock wise 2 and half turns out. then go from here may need to turn the idle scerw in so it idles abit faster just to keep it runing. its pritty easy one you know. are you near livrpool? i would have had a look for you. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.