Jump to content

Scorpa Sy250 Not Revving Out


betarob
 Share

Recommended Posts

Quick update,

still not sorted it out yet, removed airbox completely today and it revved out cleanly as if the airbox is a big restriction. Took reedblock off and checked reeds which were all perfect too. I checked the exhaust and this is not a cause of the problem for definite.

I also tried running the bike without airfilter in place and still wouldnt quite rev out.

Any help would be appreciated! I cant do much more in terms of airflow so Im stuck at what to do. Perhaps a smaller main jet? although as stated above the jetting is already standard.

Thanks very much

Link to comment
Share on other sites

 

Hi Betarob

have you actually tried adjusting the carb fuel screw (assume its a dellorto) ? It can make a lot of difference to the way the engine runs, If removing the air filter helps then its probably just compensating for the fact that its getting too much fuel..

Also have you removed the choke plunger to check that it is shutting off the enriching circuit when you turn it off.

Try it with a new plug..

TLTEL

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...