Jump to content

Inner Tube For 20


frogger
 Share

Recommended Posts

Since its been raining we have been running low pressures in my boy's Oset 20 to try and get better grip. Problem is from time to time he manages to rip the valve out with the tyre spinning on the rim. Anyone have any solutions for running low pressures and stopping the tyre spinning?

Would also be good to know if anyone can recommend a thicker inner tube to prevent pinch flats.

Any ideas?

Link to comment
Share on other sites

 

Since its been raining we have been running low pressures in my boy's Oset 20 to try and get better grip. Problem is from time to time he manages to rip the valve out with the tyre spinning on the rim. Anyone have any solutions for running low pressures and stopping the tyre spinning?

Would also be good to know if anyone can recommend a thicker inner tube to prevent pinch flats.

Any ideas?

A couple of dabs of silicon rubber on the bead of the tyre ( between the bead and rim ) may help , dont put it all around the bead as it may be to difficult to get the tyre off again.

Link to comment
Share on other sites

 
 
 

I would recommend that you find a rim lock from a ktm 65 or similar. It would be easy enough to drill a hole through the rim and install the rim lock, and then you could run any pressure w/ no worries of spinning the valve stem off. You should be able to find one on ebay for a couple of quid.

Pete

Link to comment
Share on other sites

 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...