borders1david Posted February 8, 2013 Report Share Posted February 8, 2013 Hi I have recently purchased a beta techno 98 (dougie lampkin 97 replica). Trying to find manuals etc seems to be an issue even for Beta. I found a few available but the info is very blurred and not much use. Can anyone help?? Many thanks for any help. Dave Quote Link to comment Share on other sites More sharing options...
stork955 Posted February 8, 2013 Report Share Posted February 8, 2013 G'day. what do you need? Cheers, Stork Quote Link to comment Share on other sites More sharing options...
lineaway Posted February 8, 2013 Report Share Posted February 8, 2013 All you are going to find is a parts breakdown. You might get lucky and somebody on here will have the one page owners manual. It takes around 500cc trans. fluid. It should have a sight glass. Be careful on the radiator cap as the direction is marked wrong. Quote Link to comment Share on other sites More sharing options...
rabie Posted February 8, 2013 Report Share Posted February 8, 2013 check out http://www.trialsport.com.au/beta/documents.htm for lots of rips of various beta documents i found a scanned in version of my 99 techno's manual on a link somewhere on this forum once, so keep looking Quote Link to comment Share on other sites More sharing options...
borders1david Posted February 8, 2013 Author Report Share Posted February 8, 2013 A nice electrical diagram would be nice and an owners manual. I have the parts breakdown which seems to be freely available. cheers rabie - I only had an italian parts list previously. Quote Link to comment Share on other sites More sharing options...
eddie_lejeune Posted February 9, 2013 Report Share Posted February 9, 2013 if you get one for a 99 techno or 97 techno it will be virtually the same Quote Link to comment Share on other sites More sharing options...
rabie Posted February 9, 2013 Report Share Posted February 9, 2013 (edited) 99 manual - here (9.27mb pdf) includes a wiring diagram Edited February 9, 2013 by rabie Quote Link to comment Share on other sites More sharing options...
borders1david Posted February 10, 2013 Author Report Share Posted February 10, 2013 Thanks for the 99. I'm offshore at the mo so won't be downloading until I get home. I was also having issues with the clutch master and slave. Can't build any pressure with the clutch lever. Checked the seals and they seem fine. slave looks like it may have jammed in postion. Can't see any easy way to extract. do the line have to be primed up the way with a sringe? Where's was the speed sensor on this unit for the read out on the tank? There are 2 bare wires at the back wheel which look suspect. cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.