j13me Posted February 10, 2013 Report Share Posted February 10, 2013 Hey guys. Think this is the best suited forum as I beleive any bikes run the Dallorto PHBL 26 carb? My choke flip switch is broke. I have undone the screw.. It pulls about about 5mm, clears the top seal and it won't come out any further? Is there anything else I have to remove to get it out? Number 32 here.. And this is what it looks like once removed.. Many thanks. Jamie Quote Link to comment Share on other sites More sharing options...
stillers1965 Posted February 10, 2013 Report Share Posted February 10, 2013 I would spay some carb cleaner in it, most likely it's full of crap..... Quote Link to comment Share on other sites More sharing options...
0007 Posted February 10, 2013 Report Share Posted February 10, 2013 Agreed, carb cleaner and soak overnight Nothing else will affect green gas mung Probably the reason the flipper got broke in the first place is that it was sticky Quote Link to comment Share on other sites More sharing options...
maxbikes Posted February 10, 2013 Report Share Posted February 10, 2013 put whole carb in boiling water,it will nearly fall out. Quote Link to comment Share on other sites More sharing options...
j13me Posted February 10, 2013 Author Report Share Posted February 10, 2013 So it should just pull out then? I know I can put a little force behind it if so. Will get the cleaner in there Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.