davdeborg Posted February 28, 2013 Report Share Posted February 28, 2013 hi im dave from bristol 42 thought i would relive my youth and got a ty175 however i have few problems oil leak from external seal on gear shaft , been told need to replace internal seal how do i do this does engine need stripping or can i access by removing lh side casing cheers guys Quote Link to comment Share on other sites More sharing options...
andy.t Posted February 28, 2013 Report Share Posted February 28, 2013 Hi, there is an oil seal on the linkage side, remove the small gear-change cover and the linkages and you should see the seal, how easy it is to remove I wouldn't like to say, you could try picking it out. Otherwise it will mean a strip down from the clutch side (not a bad job) removing the link bar and then pull it out. I would give it a try from the gear-change first. Quote Link to comment Share on other sites More sharing options...
davdeborg Posted February 28, 2013 Author Report Share Posted February 28, 2013 thanks mate will try that first many thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.