watch this Posted February 28, 2013 Report Share Posted February 28, 2013 (edited) Could some kind soul please post up the bearing numbers for the linkage and swingarm on the Evo, Just priced them up on Lampkins site and to be honest I let out a little bit of poo!!! I can machine the top hats myself & source the seals. Edited February 28, 2013 by watch this Quote Link to comment Share on other sites More sharing options...
pindie Posted March 1, 2013 Report Share Posted March 1, 2013 Go on the Beta website and they show the bearings in the parts diagrams with serial numbers. Contact your local Hayley bearings and they will be less than half price for top notch bearings. As a general rule for everyone, if you strip and clean with new RG2 waterproof grease every year it only takes an hour to do and means you'll never replace again and the only cost is a tub of grease every two years. It also means everything works better and you won't blame the shock when the bearings are tight through lack of maintenance. Quote Link to comment Share on other sites More sharing options...
chuckindenver Posted March 5, 2013 Report Share Posted March 5, 2013 on the main dog bone that faces the rear tire, i drill and tap, and add a grease zirk, in the middle between the bearings, use an angled zirk. moose racing offers a good bearing kit for half the money. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.